Wall mounted instant boiling water appliance with integrates 0.2 micron MicroPurity™ filtration. The Autoboil® employs twin chamber boiling water steam-heat-boost™ technology to recycle energy from steam to pre-heat the incoming cold water. The Autoboil® has inbuilt self-calibration technology, utilises highly accurate electronic temperature control and incorporates a programmable digital display with 2 energy saving modes. The main boiling water tank is wrapped with high performance insulation to ensure the healthiest water and optimum efficiency. The Autoboil® is equipped with an external two-way classic tap.
Features:
- Colorbond® White case
- 2.8” LCD display
- Calibration technology
- PowerPulse™ technology
- 2 user adjustable energy saving modes
- 0.2 micron MicroPurity™ filtration
- Integrated double non-return
- High performance moulded insulation panels
- 2-way classic tap
Nominal Capacity: 3.0 Litres
Boiling Cups*: 18 (at one time)
Recovery: 100 cups per hour
Technical Specifications:
Water Pressure: Min 70kPa-Max 500kPa
Water Connection: 12.7mm BSP
Power Rating: 1.5kW 220-240V 50Hz
Dimensions: 439mm H x 300 W x 183 D
Product Approvals: WaterMark, CE
Warranty: 2 Years
Installation Requirements:
1. Must be installed by a suitably qualified person in accordance with manufacturers instructions and with all relevant plumbing and electrical regulations.
2. In some hard water areas where mineral scale accumulation can become a problem, consideration should be given to the maintenance required, adding a high capacity filtration or water softening system should be considered.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.
