40 + 40 Litre Electric Pasta Cooker with 2 wells, (Watermark)
In addition to cooking pasta, you can also cook noodles of every kind, rice, dumplings and vegetables.
Features:
- Unit has infrared heating system positioned beneath the base of the well.
- Water basin in 316-L type stainless steel
- Provided with integrated drip zone on which baskets can be placed for draining purposes
- Water basin is seamlessly welded into the top of the appliance
- 40 litre water basins
- Automatic starch removal function during cooking: improved water quality over time
- Automatic low-water level shut-off: no accidental over-heating
- Easy-to-use control panel
- All major compartments located in front of unit for ease of maintenance
- Continuous water filling regulated through a manual water tap
- Large drain with manual ball-valve for fast emptying of well
- IPX5 water resistance certification
- The special design of the control knob system guarantees against water infiltration
- One piece pressed 2mm work top in stainless steel
- Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps
- Unit delivered with four 50mm legs in stainless steel as standard (all round Stainless steel kick plates as option.)
- Automatic lifting system (optional accessory): 200mm wide unit with three stainless steel basket supports, holding one GN 1/3 basket each, to be placed on either or both sides of machine to provide automatic lifting for six small portion baskets (to be ordered separately - please ask us for a quote). Possibility to memorize nine cooking times through digital control
Electric:
Supply voltage: 380-400 V/3N ph/50/60 Hz
Electrical power max: 20 kW
Total Watts: 20 kW
Predisposed for: 380-400V 3N-50/60Hz 18-20kW
Water:
Drain "D": 1"
Incoming Cold/ Hot Water line size: 3/4"
Total Hardness: 5-50 ppm
Key Information:
Usable Well Dimensions: 300mm W x 260 H x 520 D
Well Capacity Max: 40 Litres
Net Weight: 115 kg
Shipping Dimensions: 1120mm H x 1020 W x 860 D
Sustainability:
ESD is available as an optional accessory - installed separately: energy saving device uses heat produced by water drained through the overflow to pre-heat tap-in water up to 60°C, for constant water boiling. Please ask us for a quote.
**If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150mm should be maintained or some form of heat insulation fitted.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.
