Hobart ECOMAX504-C Undercounter Dishwasher and Glasswasher

With a high capacity of up to 60 racks per hour, this dishwasher is a reliable partner for clubs, bistros, taverns and fast-food restaurants. The practical floor unit fits under every work counter.

Features: 

• Single-button control with digital temperature indication
• Flat surface of control panel
• 3 selectable wash cycles
• Special hygiene programme for hygienic cleanliness
• Rotating top and bottom wash system to distribute the wash water evenly over the dishes
• Indented nozzles prevent blocking
• Thermostop-function for guaranteed rinse temperatures
• Removal of rinse arms without any tools
• Easy access to all parts
• Deep drawn rack track
• Double-walled housing and front door
• Tank strainer reduces soiling of the tank water
• Integrated cycle counting, e.g. for control of water treatment system
• USB connect for easier service access
• Refill signal monitors fill level of external chemical containers with optional suction lances

Standard Equipment:

• Plate rack P-18-12
• Cutlery basket CB1
• Rinse aid dispenser
• Rinse pressure pump for optimum flow pressure
• Heater with thermostat control
• Electric cable, flexible water supply hose and drain hose
• Rear panelling

The installation of machines with integrated water softener requires a back flow safety device (at site) according to DVGW-DIN 1988.
Line pressure required: 0.8 to 6 bar

Technical Data:

Cycle Times*: 60/120/ 180 seconds

Rack capacity: up to 60 racks/h 

Tank capacity: 25 L

Water consumption: 2.0 L/rack

Wash pump: 0.34 kW

Tank heating: 1.8 kW

Booster loading - standard: 5.5 kW (400 V)

Total connected load - standard: 5.9 kW (400 V)

Rated voltage: 400/ 50/ 3N (230/ 50/ 1)

External dimensions: 576mm W x 604 D x 820 H

Loading height: 360 mm

Rack Size: 500 x 500mm 

* The machine is equipped with an automatic cycle-time control which ensures hygienic rinse temperatures even on a cold-water supply or with reduced heating performance.

Warranty: 12 Months Warranty

Please note: For machine protection the water hardness should not exceed 3°dH, if higher we recommend using a HOBART HYDROLINE water softener / treatment system.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.