Blizzard Under Bench Ice Maker - Air Cooled - SN-120P

**Use the discount code: SAVE10 to apply an additional 10% discount on checkout for this product**

Key Features:

• Output per 24 hr: Up to 55kg
• Storage Capacity: Approx. 18kg (Bin Control Setting Approx. 10kg)
• U.S. Morrill Water Pump
• German ËBM-Pabst fans
• Hisakage PCL
• 22mm³ ice-cubes
• Denmark Danfross Expansion Valve & Dry Filter
• Japanese Saginomiya Solenoid & Hydraulic Valve
• Storage (kg）: 18
• Watermark certified product sticker

Dimensions: 500mm W x 590 D x 850 H

Warranty: 2 Years Parts and Labour

Power: 240V; 480W; 10amp plug and lead included

Please note you will need to contact our friendly sales team for a quote to deliver to a residential address. 

All Ice machines MUST be maintained to ensure high performance.
The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.
This maintains the quality of the ice shape and thickness.

6 Monthly Maintenance Program

 

• Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler.

 

• Sanitise water reservoir, distribution tubes, and bin interior.

 

• Clean and flush condenser coils (air-cooled units).

 

• Inspect condenser fan motor and blades.

 

• Check inlet water valve, float, and filters for correct operation.

 

• Verify ice thickness probe or sensor calibration.

 

• Inspect refrigerant pressures, superheat, and subcooling - adjust if necessary.

 

• Test compressor amperage and general performance.

 

• Inspect water pump operation and clean pump housing.

 

• Check harvest cycle operation (heater or hot gas valve).

 

• Inspect electrical connections, relays, and contactors.

 

• Replace inline water filter cartridge.

The above maintenance program will extend machine life, improve ice quality, reduce bacterial growth risks and ensure food safety compliance.

If your machine is not maintained, your warranty may be void.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.